Protective equipment, TEMPISH FID 3-set black and white

Figure skating accessory

General Product Safety Information - Figure Skating Accessories

The product is an accessory product related to figure skating. This category may include, but is not limited to, figure skating clothing, bags, gloves, socks, tights, headbands, hair accessories, insoles, shoe covers, edge protectors, plush edge protectors, towels, textile and decorative accessories, and other sport and storage accessories.

The product is for normal use only.

Most of the products do not constitute personal protective equipment and do not provide complete protection against falls, collisions or other injuries.

Safety waings and instructions for use:

• Use the product only for its intended purpose.

• Check the condition of the product before use.

• Do not use damaged, to, broken, deformed or inadequate products.

• Improperly secured or defective accessories may cause an accident.
• Long straps, cords, rubber or elastic components may become entangled or cause injury.
• Smaller components may present a choking hazard to small children.
• This product is not a toy.
• Children should only be used under appropriate adult supervision.
• Packaging should be kept out of the reach of children
• .
• Plastic packaging may present a choking hazard.
• Some textile or synthetic materials may cause irritation or allergic reactions in case of sensitive skin.
• In case of irritation or discomfort, discontinue use.
• Keep away from open flame, high heat and strong chemicals.
• Overloading of bags and containers may cause material tears or injury.
• Increased caution is required when using edge protectors and blade contact products due to sharp blades.

• Insoles, socks and clothing products are not a substitute for properly sized and properly secured skates.

• Inappropriate use may result in injury or material damage.

Maintenance instructions:

• Clean and store the product according to the instructions.

• Gentle cleaning is recommended for textile products.

• Wet products should be dried after use.

• Damaged or heavily wo products should be replaced.

• Regular inspection of zippers, Velcro, elastic and fasteners is recommended.

• Store products in a dry, clean and well-ventilated place.

Storage:

• Store in a dry, cool place.
• Direct sunlight, extreme temperatures or prolonged exposure to moisture may cause damage to the material.

Waste management:

The

• product and its packaging must be disposed of in accordance with local waste management regulations.

Hockey supplement

General product safety information - hockey accessories

The product is a hockey related accessory. The category may include, but is not limited to, hockey bags, canteens, canteen holders, tape, edge protectors, blade guards, laces, socks, towels, hats, clothing accessories, neck warmers, head straps, skate accessories, tools, training accessories, storage, cleaning and maintenance products, and other sport and storage accessories.

The product is intended for normal use only.

Most of the products do not constitute personal protective equipment and do not provide complete protection against injury unless specifically indicated by the manufacturer.

Safety waings and instructions for use:

• Use the product only for its intended purpose.

• Check the condition of the product before use.

• Do not use damaged, broken, cracked, deformed or defective products.

• Improperly attached or defective accessories may cause injury.
• Long straps, cords, rubber or elastic components may become entangled or cause injury.
• Smaller components may present a choking hazard to small children.
• Sharp or hard components may cause injury.
• Increased caution is required when using products that come into contact with hockey blades or skates.
• Overloading bags and containers may cause material tears or injury.
• Use sports skates and containers only as intended.
• Keep cleaning or maintenance products out of the reach of children.
• This product is not a toy.
• Children should only use it under appropriate adult supervision.
• Keep packaging material out of the reach of children
• .
• Plastic packaging may pose a choking hazard.

• Some materials may cause irritation or allergic reactions in case of sensitive skin.

• In case of irritation or discomfort, discontinue use.

• Keep away from open flame, high heat and strong chemicals.

• Inappropriate use may result in injury or material damage.

Maintenance instructions:

• The product should be checked regularly and cleaned if necessary.
• Textiles and clothing products should be cleaned according to the instructions for use.
• Wet products should be dried after use

.

• Regular inspection of moving or fastening parts is recommended.

• Damaged or wo products should be replaced.

• The use of strong chemicals or solvents is not recommended.

• Store the product in a dry, clean place.

Storage:

• Store in a dry, cool, well-ventilated place.

• Avoid direct sunlight, extreme temperatures and prolonged exposure to moisture.

Waste management:

The

• product and its packaging must be disposed of in accordance with local waste disposal regulations.

• Electronic or battery components must be disposed of in accordance with the relevant regulations.

Roller skate protective equipment

General Product Safety Information - Roller Skate Protective Equipment

The product is protective equipment or a set of protective equipment for roller skating. The category may include helmets, wrist guards, elbow pads, knee pads, protectors and other sports protective accessories.

The intended use of the product is to reduce the risk of injury during roller skating in the event of falls, impacts and certain mechanical impacts.

Protective equipment may reduce the risk of certain injuries, but it does not provide complete protection against all falls, collisions or other injuries.

Safety waings and instructions for use:

• Use the product only for intended sporting activities.

• Choosing the correct size for each protective item is of paramount importance.

• Improperly sized or incorrectly secured protective equipment can reduce the effectiveness of protection and may cause injury.
\
• Protective equipment should be properly secured and adjusted before each use.
• Before use, check the following:
  • hard shells and protective surfaces,
• • padding,
• • straps and fasteners,
• • Velcro,
• • buckles,
• • stitching,
• • stability of the overall equipment.
\
• Do not use damaged, cracked, deformed or wo products.
• Damaged or compressed protective layers may reduce the effectiveness of the protection.
• The helmet should be replaced after a severe impact even if no exteal damage is visible
• .
• Roller skating is a sporting activity with a risk of injury.
• Even when wearing protective equipment, extra care is required.
• The product is not a toy.
• Children should only use it under appropriate adult supervision.
• Smaller parts may present a choking hazard to young children.
• Packaging should be kept out of the reach of children.
• Plastic packaging may pose a choking hazard.
• Some materials may cause irritation or allergic reactions in case of sensitive skin.
• In case of irritation or discomfort, discontinue use.
• Keep away from open flames, high heat and strong chemicals.

• Modification or improper repair of the product may be dangerous.

• Improper use may result in personal injury or material damage.

Maintenance instructions:

• It is recommended that protective equipment be aired and dried after use.
• Storage in wet conditions may cause unpleasant odours, mould or material damage.
• The product should be checked regularly for damage and wear.
• Regular checks of straps, buckles, Velcro and fasteners are recommended.

• Use of a mild detergent is recommended.

• Use of strong chemicals or solvents is not recommended.

• Damaged or heavily wo products should be replaced.

• Store the product in a dry, well-ventilated place.

Storage:

• Store in a dry, cool place.

• Avoid direct sunlight, extreme temperatures and prolonged exposure to moisture.

Waste management:

• product and its packaging should be disposed of in accordance with local waste management regulations.

• Plastic, foam, textile and metal parts should be disposed of separately where possible.

Off ice workout supplement

General product safety information - off ice training accessories

The product is an accessory for off ice training and sports activities. The category may include, but is not limited to, grip sprays, balance boards, training gates, training pads, passing devices, coordination aids, training balls, synthetic training discs, reaction training devices, shooting pads, floor training accessories and other technical training aids.

The product is to be used for sports and training purposes only.

Most of the products are not considered personal protective equipment.

Safety waings and instructions for use:

• Use the product only for its intended purpose.

• Check the condition of the product before use.

• Do not use damaged, broken, cracked, deformed or defective products.

• Use exercise equipment only on a stable, suitable surface.

• Slippery or uneven surfaces present an increased risk of injury.
\
• Increased attention is required when using balance boards and balance training equipment.
• Loss of balance may result in a fall or injury.
• Children should only use exercise equipment under appropriate adult supervision.
• Exercise gates should be set up and secured in a stable manner.
• A gate that tips over or moves may cause injury.
\
• Balls, pucks and shooting equipment can move at high speeds and may cause injury.
• Proper protective equipment is recommended.
• Grip sprays and other chemicals should only be used according to the manufacturer's instructions.
• Use sprays in a well-ventilated area.
• Avoid contact with eyes, skin and mucous membranes
.\
• Sprays may be flammable.
• Do not use near open flames or ignition sources.
• Product may contain small parts that may present a choking hazard to small children.
• Product is not a toy unless specifically indicated by the manufacturer.
• Packaging should be kept out of the reach of children. Plastic packaging may present a choking hazard.

• Some materials may cause irritation or allergic reactions in case of sensitive skin.

• In case of irritation or discomfort, discontinue use.

• case of misuse, personal injury or material damage may occur.

Maintenance instructions:

• Tools should be checked regularly for damage and wear.

• Moving parts and fasteners should be checked regularly.

• Damaged or wo products should be replaced.

• Properly reseal sprays after use.

• It is recommended to clean textile and plastic items with mild detergents

• Strong chemicals or solvents are not recommended.

• Store products in a dry, clean place.

Storage:

• Store in a dry, well-ventilated area.
• Avoid direct sunlight, extreme temperatures and prolonged exposure to moisture.
• Keep sprays away from heat and sources of ignition
• .Keep out of the reach of children.

Waste disposal:

• product and its packaging must be handled in accordance with local waste management regulations.
• Hazardous waste regulations must be observed when handling products containing chemicals or aerosols
• .Plastic, rubber, textile and metal parts should be disposed of separately where possible.

Off ice protective equipment

General product safety information - off ice protective equipment

The product is protective equipment or a set of protective equipment for off-ice training and sports activities. The category may include helmets, wrist guards, elbow pads, knee pads, protectors, compression and padded protective clothing and other sports protective accessories.

Proper use of the product to reduce the risk of injury during off ice training, roller skating, floorball, street hockey and other sports activities.

Protective equipment may reduce the risk of certain injuries, but it does not provide complete protection against all falls, collisions or other injuries.

Safety waings and instructions for use:

• Use the product only for intended sporting activities.

• Choosing the correct size for each protective item is of paramount importance.

• Improperly sized or incorrectly secured protective equipment can reduce the effectiveness of protection and may cause injury.
\
• Protective equipment should be properly secured and adjusted before each use.
• Before use, check the following:
  • hard shells and protective surfaces,
• • padding,
• • straps and fasteners,
• • Velcro,
• • buckles,
• • stitching,
• • stability of the overall equipment.
\
• Do not use damaged, cracked, deformed or wo products.
• Damaged or compressed protective layers may reduce the effectiveness of the protection.
• The helmet should be replaced after a severe impact or fall even if no exteal damage is visible
• .
• Off-ice sports activities may involve a risk of injury.
• Even when wearing protective equipment, extra caution is required.
• This product is not a toy.
• Children should only use it under appropriate adult supervision.
• Smaller parts may present a choking hazard to young children.
• Packaging should be kept out of the reach of children.
• Plastic packaging may pose a choking hazard.
• Some materials may cause irritation or allergic reactions in case of sensitive skin.
• In case of irritation or discomfort, discontinue use.
• Keep away from open flames, high heat and strong chemicals.

• Modification or improper repair of the product may be dangerous.

• Improper use may result in personal injury or material damage.

Maintenance instructions:

• It is recommended that protective equipment be aired and dried after use.
• Storage in wet conditions may cause unpleasant odours, mould or material damage.
• The product should be checked regularly for damage and wear.
• Regular checks of straps, buckles, Velcro and fasteners are recommended.

• Use of a mild detergent is recommended.

• Use of strong chemicals or solvents is not recommended.

• Damaged or heavily wo products should be replaced.

• Store the product in a dry, well-ventilated place.

Storage:

• Store in a dry, cool place.

• Avoid direct sunlight, extreme temperatures and prolonged exposure to moisture.

Waste management:

• product and its packaging should be disposed of in accordance with local waste management regulations.

• Plastic, foam, textile and metal parts should be disposed of separately where possible.